Cast bullets can be heat treated to increase their hardness providing your alloy has some antimony present. To heat treat your bullets: Cast your bullets in the normal manner, saving several scrap bullets. Size your bullets but do not lubricate them. Place several scrap bullets on a pan in your oven at 450 degrees and increase the temperature until the bullets start to melt or slump. Be sure to use an accurate oven thermometer and a pan that will not be used again for food. Once the bullets start to melt or slump, back off the temperature about 5 to 10 degrees and slide in your first batch of good bullets. Leave these in the oven for a half hour. Remove the bullets from the oven and plunge them into cool water. Allow them to cool thoroughly. When you are ready to lubricate, install a sizing die .001" larger than the one used to initially size them. This will prevent the sides of the bullets from work-softening from contact with the sizing die. Next apply gas checks if required and lubricate. These are now ready for loading.
Our ultrasonic cleaners mostly differ in capacity. You need to first select a unit based on whether you are cleaning case or firearms, or possibly both. Lower volume reloaders can save money by purchasing units such as the Turbo Sonic 1200 or 2500. Higher volume reloaders and/or ones looking to clean pistols would be best served by the larger Turbo Sonic 6000. For gunsmiths looking to clean long guns, or those with high volume cleaning needs, we offer the Turbo Sonic Power Pro.
This could be caused from roll-over of the case mouth if the pilot is not fully seated into the cutterhead. Another cause could be a dull cutter in need of replacing or an excessive amount of brass being removed. Usually no more than .015” to .020” should be taken off at one time. If more needs to be removed, it is best to do it in several steps, deburring the case between trims.
Lyman Products does not intend to collect personal information from anyone under the age of 18. If you are under 18 years old, you should not register with or otherwise provide personal information to the website.
What Customer Personal Information Does Lyman Products Collect?
Information You Provide Us: We receive and store any information you enter on our website or give us in any other way. This may include personal information, such as your name, email address, phone number, address, and payment information.
Information from Other Sources: We may receive information about you from third parties and store it with your information.
We use secure socket layer (SSL) encryption and other security protocols to help protect your personal information. We cannot, however, guarantee protection of all information against interception, misappropriation, misuse, or alteration, or that your information may be not be disclosed or accessed by accidental circumstances or by the unauthorized acts of others.
How Do We Use Customer Information We Collect
We may use the information we collect to
fulfill orders and respond to your requests
verify orders and to monitor for potentially unlawful activity in your account
customize future shopping experiences for you
improve our website
provide you with news and information about events, activities, offers, promotions, products, and services we think will be of interest to you.
When Do We Share Customer Information
We may share information we collect: with affiliates; service providers and vendors who support our business; with your consent; in an aggregated or anonymized form that does not directly identify you; as required in connection with corporate financing or acquisition; as required by law, regulation or other government authority or to protect the rights and property of Lyman Products or the public.
Terms and Conditions
Last Updated: September 15, 2016
By visiting LymanProducts.com and using the website, you are accepting the practices described in these Terms and Conditions.
Lyman Products grants you a limited, non-exclusive, non-transferable, non-sublicensable license to access and make personal and non-commercial use of the LymanProducts.com website. Unless otherwise licensed, you do not have the right to make any collection or use of any product listings, descriptions, or prices; or any use of data mining, robots, or similar data gathering and extraction tools.
You consent to receive communications from us electronically, such as e-mails, texts, mobile push notices, or notices and messages on this site. You agree that all agreements, notices, disclosures, and other communications that we provide to you electronically satisfy any legal requirement that such communications be in writing.
You represent that you are 18 years old or older or are using the LymanProducts.com website with the involvement of a parent or guardian. You are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer, and you agree to accept responsibility for all activities that occur under your account or password. Lyman Products reserves the right to refuse service, terminate accounts, remove or edit content, or cancel orders in its sole discretion.
The Lyman Products website may permit users to post or upload comments, reviews, photos, and other content for others to view or access (“User Generated Content”). You may not post content that is illegal, obscene, threatening, defamatory, invasive of privacy, infringing of intellectual property rights (including publicity rights), or otherwise injurious to third parties or objectionable, nor may you post material containing or linking to software viruses, political campaigning, commercial solicitation, chain letters, mass mailings, or any form of "spam" or unsolicited commercial electronic messages. You may not use a false e-mail address, impersonate any person or entity, or otherwise mislead as to the origin of User Generated Content. Lyman Products in its discretion may remove or edit any and all User Generated Content. You grant Lyman Products a nonexclusive, royalty-free, perpetual, irrevocable, and fully sublicensable right to use, reproduce, modify, adapt, publish, translate, create derivative works from, distribute, and display such User Generated Content and to use the name that you provide in connection with such User Generated Content. You warrant and represent: that you own or otherwise control all of the rights to the User Generated Content that you post; that the User Generated Content is accurate; that use of the content you supply does not violate this policy and will not cause injury to any person or entity; and you will indemnify the Lyman Products for all claims arising from the User Generated Content.
LYMAN PRODUCTS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE LYMANPRODUCTS.COM WEBSITE AND PRODUCTS SOLD ON THE LYMANPRODUCTS.COM WEBSITE. LYMAN PRODUCTS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, AND CONSEQUENTIAL DAMAGES ARISING FROM USE OF THE LYMANPRODUCTS.COM WEBSITE AND/OR PRODUCTS SOLD ON THE LYMANPRODUCTS.COM WEBSITE.
Your use of the LymanProducts.com website and purchases of products therefrom will be governed by the laws of the state of Connecticut, without giving effect to its conflicts of law provisions. You consent and submit to the exclusive jurisdiction and venue of the state and federal courts located in Connecticut.